Now Available ComposiMold Urethane Starter Kit! Learn to Make Plastic Parts

100% Reusable Mold Making Material and Easy Flow Polyurethane Resin

Learn to Mold and make Plastic Castings Worry Free

Everything you need to start making your own plastic parts. And if you make mistakes-don’t worry. Remelt the ComposiMold reusable Mold making material and try again.

Each ComposiMold Urethane Starter Kit contains everything you need to begin molding and casting:
• ComposiMold 1 pound container
• 2 pounds of Plastic (1 pound Part 1 and 1 pound Part 2)
• Mold release for Plastic
• 5 Mixing sticks
• 2 filters for filtering ComposiMold
• Funnel for holding the filters
• Cups for Mixing Plastic • Instruction book

The Instruction Book starts with simple instructions on how to use the ComposiMold material followed by mold making instructions for a simple ComposiMold mold and plastic casting. This initial mold making and casting is followed by more complicated molds that are typically two part molds. Then we describe how to mix and use the plastic. We do our best to answer many of the typical questions in the Frequently Asked Question Chapter. We then go into ideas for other methods to make molds and castings. As you experiment you will begin to see how the process works and learn what works for you. The book ends with ideas for further mold making. (10 chapters, B&W 8.5x11, 38 pages)

ComposiMold is a reusable mold making material that works by melting and pouring. Many casts can be performed using the same mold. ComposiMold is good for the mold maker and craft artist because it can be reused to make different molds without worrying about wasting mold making material (such as urethanes, silicones, or Alginate). ComposiMold is an excellent material for those wanting to learn and become involved in sculpting, modeling, and mold making without having to worry about mistakes or wasting material. ComposiMold is flexible, rubbery, molding material that can be melted poured and reused. This material is a thermoplastic mold making material that is great for small mold parts using many different casting materials including plaster, cement, epoxy, polyurethane, and others. ComposiMold can be used for molds, mold making and as a resin.

ComposiCast-3770 is a two component 100% solids urethane casting system. It is easy to process, with a low exotherm (maximum 170°F) that demolds in 15 – 20 minutes. The ComposiCast-3770’s low exotherm works exceptionally well with the ComposiMold Reusable Mold Making Material. The ComposiCast-3770 uses a 1:1 mixing ratio (by weight and volume) and solidifies to a beautiful off-white color. The texture is similar to a lightweight porcelain feel.
.