Easy Make It Chocolate Duplicate Your Art in Chocolate

https://youtu.be/k5Mt9UusrY8

This is Easy Make It Chocolate, and with it you can duplicate almost anything
into chocolate .

The process is, as the name says, Easy. Melt the Easy Make
It Chocolate in a microwave or double boiler, much like you melt your
chocolate.

When warmed, it turns into a thin liquid that you pour it
over your object that you want to duplicate,

Then let cool or place it in the freezer for 15 minutes.

When it’s cool, Easy Make It is a stretchable, flexible
rubber that flexes around chocolate to make removal from the mold easy

And what sets Easy Make It apart is that it is Reusable. You
can remelt it again and again so that you can pour over your next design.

Because you can use it as many times as you want, it makes a
great tool, so it is there whenever you need it. Just pull out the Easy Make It
Chocolate, and make a mold that is unique and 100% your own.

Most of you have used the plastic or silicone molds. We’ve
all seen the molds, probably many of you have the same ones because they make
thousands of them that are all the same…and like many of us, you use it once,
and then it goes onto your shelf never to be used again.

So for the price of one silicone mold, you can have many dozens
of unique shapes, each one as unique as you.

Easy Make it is eco-friendly and does not contain  any petroleum based polymers. And because it
is reusable, you are not putting more non-biodegradable rubber into the world.

And of course, Easy Make it is also 100% food contact safe. Be
sure your original part is clean, pour EMC over it, and you’re ready. To clean,
use a cold wet wash cloth and let it completely dry. Remelt it to make your next
creation.

And because you know it can be melted in a microwave or
double boiler, you know you can use it almost any time for weddings, school
treats, birthdays, or just because.

What you do is only limited by your imagination.

Experiment with shapes you never thought possible

And for those who want to take their art to the next level, When
you are ready to create something of your own, when you want to make the
creations that are in your mind, the tool to use is Easy Make It Chocolate.

Hi I’m Stan Farrell, the developer of Easy Make It Chocolate
and President of ComposiMold. Along with the rest of the team here at
ComposiMold,  Michelle, Shawn, Bobbi, and
Dan, we are here to  help make your ideas
real. What can we do to help?

We have a Free E-book available that gives you more examples
and more ways of using our reusable mold making products. Ask below,  Call or Email us if you have questions.  We would love to see what you make, and thank
you!

Please share this video and tell everyone you know about ComposiMold! Plus subscribe to see the next amazing blog post from ComposiMold!

For More Information Visit: 

www.ComposiMold.com

www.Facebook.com/ComposiMold

www.YouTube.com/ComposiMold 

"It's clobbering time" Casting the Thing from The Fantastic 4 in White Chocolate

Fantastic 4 The Thing Action Figure-Cast in Chocolate using ComposiMold-FC

                                   
Yes, that's a white chocolate action figure! The original Fantastic Four Thing action figure was purchased at a Goodwill Store. To make the mold, we placed him in a bucket and poured ComposiMold over him. We poured in intervals to help attach him, so he would not float. Approximately 1 inch of ComposiMold was poured into the bucket, and after that solidified, the rest of the ComposiMold-FC was poured over that.

ComposiMold-FC Mold with the Thing inside

After the ComposiMold mold solidified, we used a razor blade to cut down the sides. We tried to keep the parting line along the edge of the Thing. We also cut a line above the head to ensure that we could remove the head from the mold after the chocolate is poured into the mold.

The action figure mold being coated with white chocolate 

To make sure the mold is filled, each half of the two part mold is coated with the white chocolate before putting the halves together. The two halves were taped shut and placed in the freezer after being filled with the white chocolate.

Action figure mold filled with white chocolate

The white chocolate is in the mold and halves are ready to be put together

A little extra white chocolate is added into the feet of the  mold  to make sure it is filled
(is that a clone of Luke Skywalker in the photograph? Stay-tuned!)

 To make the chocolate harder, we placed it into the refrigerator to cool.  After completely solidifying, we removed one half of the mold.

You can even see the on/off switch on the casting! Awesome details!

We thought we were in trouble when his leg broke off while removing the chocolate action figure from the mold, but chocolate is officially the best casting material. It taste great and it is reusable, just like ComposiMold. So we used a hot air gun to slightly melt the leg, and we put the two parts back together!

Argg! Doctor Doom has struck! The Thing has an injured leg!

The Thing can be repaired, thanks to chocolates re-casting ability

Using the Human Torch (or in this case a hot air gun), The Thing is healed!

Super awesome details! You can see his rock skin and the Fantastic Four on his belt. His leg is all better!

The Thing Action Figure of the Fantastic Four  Climbs a mountain of ComposiMold-FC!

The Thing Copy with the Thing Original

Thanks! And have fun with your creations!

For More Information visit:
www.ComposiMold.com
www.Facebook.com/ComposiMold
www.YouTube.com/ComposiMold
 order at www.ComposiTherm.com